The Hayward Trivac 700 Slow or no forward movement
| Cause | Solution |
|
|
The Hayward Trivac 700 Cleaner does not reach farthest point in pool
| Cause | Solution |
|
|
The Hayward Trivac 700 Cleaner unable to clear obstacles (stairs, steps…)
| Cause | Solution |
|
|
The Hayward Trivac 700 Hose frequently tangles
| Cause | Solution |
|
|
|
|
|
|
The Hayward Trivac 700 Sweep hose sprays out of pool
| Cause | Solution |
|
|
The Hayward Trivac 700 Little or no sweep host movement
| Cause | Solution |
|
|
|
|
|
|
The Hayward Trivac 700 running on side or upside down
| Cause | Solution |
|
|
|
|
The Hayward Trivac 700 Cleaner cannot climb to the surface in TOP mode
| Cause | Solution |
|
|
|
|
The Hayward Trivac 700 Cleaner runs in small circles
| Cause | Solution |
|
|
The Hayward Trivac 700 Cleaner get stuck on shallow area of pools (beach entry, tanning shelf…)
| Cause | Solution |
|
|
The Hayward Trivac 700 Cleaner inability to recover from obstacle or specific areas
| Cause | Solution |
|
|
|
|
The Hayward Trivac 700 Cleaner does not cover the entire pool
| Cause | Solution |
|
|
My Trivac 700 is brand new, when I set to top mode it will skim about 6 feet then go to the bottom and will not come back up and continue skimming the top. The pressure is correct the bag is clean. In bottom mode it will sometime flip upside down and again the pressure is as recommended and the bag is empty. Any idea what I can do to correct these problems would be greatly appreciated.
Submit Your Own Issue