Water Tech Pool Blaster Max CG Troubleshooting
Most Common Water Tech Pool Blaster Max CG Reported Problems
Technical Malfunction Issues
No value found for field: technical_malfunctionsPower and Charging Issues
No value found for field: power_and_chargingPerformance Issues
No value found for field: performanceSetup and Usage Issues
No value found for field: setup_and_usageCustomer Support Issues
No value found for field: customer_supportOther Issues
No value found for field: otherWater Tech Pool Blaster Max CG Pool Vacuum Not Working?
If you're experiencing issues with your Water Tech Pool Blaster Max CG pool equipment, you're not alone. Many users have faced similar challenges and have shared their experiences to help others troubleshoot and resolve these problems.
My pool blaster will turn on but when I submerge it it turns off when I get close to the bottom. Or sometimes it won’t come on at all and I have to retry again and again, giggle it or lay it horizontal and try any or all of these to get it to come back on for 5-10 seconds. Almost like it needs to warm up?
Issue Category:
Technical Malfunctions
Ownership Length:
N/A
No suction. Have tried turning filter bag inside out and rubber band trick…nothing. This is second one i have bought, they dont seem to last more than 2 seasons
Issue Category:
Performance
Ownership Length:
N/A
My pool blaster is fully charged but will only switch on after numerous button presses and when it does come on it only lasts a few seconds.
Submit Your Own IssuePool Blaster Max CG pressing switch although fully charge doesn’t turn on. It takes multiple presses(sometimes 10/15) for it to turn on.
Submit Your Own Issue