If cleaner is not moving or pulsating:
• Check to ensure that the main drain and all suction lines are closed, except for the suction line to which the
cleaner is attached.
• Check for sufficient flow through the cleaner hose using the flow gauge.
• Check for debris in the filter, pump basket, regulator valve or leaks in the hose.
• Check for debris in the cleaner’s flapper. Debris may prevent flapper movement or restrict flow. See page 6 for
instructions.
• Pool pump and filter system may be too small (incapable of providing 14 gallons per minute water flow). Consult
your pool professional.
If cleaner tracks in a repetitive pattern
• Check the swivel on the top of cleaner. It should turn freely.
• Check the return line water flow and re-direct as necessary with an eyeball diverter.
• Refer to page 6, “Eyeball Diverter Positions”.
• Check cleaner hose to ensure it has not become bent or kinked. It only takes one bent or kinked hose section to
hinder the cleaning coverage. One way to check for kinks in your hose is to lay each section flat on your pool’s
deck (or other flat surface). The hose should be perfectly straight and flat. Do not coil the hos