Jacuzzi JCRX Troubleshooting
Most Common Jacuzzi JCRX Reported Problems
Technical Malfunction Issues
No value found for field: technical_malfunctionsPower and Charging Issues
No value found for field: power_and_chargingPerformance Issues
No value found for field: performanceSetup and Usage Issues
No value found for field: setup_and_usageCustomer Support Issues
No value found for field: customer_supportOther Issues
No value found for field: otherJacuzzi JCRX Pool Cleaner Not Working?
If you're experiencing issues with your Jacuzzi JCRX pool equipment, you're not alone. Many users have faced similar challenges and have shared their experiences to help others troubleshoot and resolve these problems.
The Jacuzzi jcrx will only run for a few minutes and stop. Prior to starting to do that it’s been working great. Any suggestions? Thank you.
Roger
Issue Category:
Performance
Ownership Length:
N/A
The computer lights up but when I push the power button it flashes 3 or 4 times then the lights go off.
Issue Category:
Power and Charging
Ownership Length:
N/A
The power indicator starts blinking after I turn it on and cleaner doesn’t do anything
Issue Category:
Technical Malfunctions
Ownership Length:
N/A
My Jacuzzi JCRX does not move in the water. Is this something in the pool cleaner or remote control. The blue light comes on, but nothing moves. Is there a safe method to disassemble and then placing it back in the water if something is preventing it from moving? Can the remote power control also be disassembled to replace or repair any of the switches. When it did work, the main power switch became very difficult to push for turning on the pool cleaners. Can these parts be replaced?
Submit Your Own IssueI was incorrect on my last post my JCRX will run for a couple of minutes and then the power light starts flashing and then it turns off o can restart it but the same thing happens
Submit Your Own IssueModel JCRX robotic in ground pool cleaner
Submit Your Own IssueCleaner works for 5 minutes and then it stops and 2 red lights come on
My jcrx left side isn’t scrubbing
Submit Your Own Issue(Roller) not moving
And the track isn’t functioning.
I can spin it freely.
Another words it goes in large circle
My pool cleaner started to clean only a small section of the pool, as if it forgot how large the pool is. How do I reset it?
Submit Your Own IssuePower light is flashing. Robot initially started then stopped. Have unplugged and checked each cord for any damage and continues to flash. Worked fine 48hours prior and has so for the last two seasons.
Submit Your Own Issuehose is constantly tangled
Submit Your Own IssueIt has power at the base but won’t run in the pool ??
Submit Your Own IssueFan starts for cleaner, but then shuts off after in a little bit
Submit Your Own IssueIt has only been used for two weeks (and worked fine), and the power is not staying on. It cuts off immediately after plugging it in.
Submit Your Own IssueMy Jacuzzi pool cleaner will only climb the pool wall for lifting. Otherwise it doesn’t move at all.
Submit Your Own IssueHow to replace Floating Cord
Submit Your Own IssueNot lifting anymore
Submit Your Own IssueThe Jacuzzi JCRX is just rotating inside the pool, advance just couple of inches, and then continue rotating. Is not climbing the walls and when I use the lift system, it does not go all the way up, it stops just right at the beginning of the wall in the deep.
Submit Your Own IssueSo what is the problem?
Submit Your Own IssueMt Jacuzzi JCRX is no longer picking up leaves but the basket is clean. Has anyone experienced this problem and been able to fix it?
Submit Your Own Issue