The Hayward Poolvergnuegen The PoolCleaner 4 Wheel does not move
Solution:
- The pump may be turned off.
- The pump may not be primed. Check for leaks in the system(symptoms — bubbles from the returns ?)
- Problem or obstruction in the system
- Filter needs backwashing . Clean pump basket.
- Pump impeller may be blocked
- Obstruction in the PoolCleaner itself
The Hayward Poolvergnuegen The PoolCleaner 4 Wheel moves to slow
Solution:
- Problem or obstruction in the system.
- Obstruction in the PoolCleaner itself
- Low wheel RPM (insufficient flow).
The Hayward Poolvergnuegen The PoolCleaner 4 Wheel right wheel will not turn when rotated by hand.
Solution:
- Obstruction in the PoolCleaner itself
The Hayward Poolvergnuegen The PoolCleaner 4 Wheel loops in the hoses won’t come out
Solution:
- The hoses have been stored in a coiled position. Lay them straight in the sunlight
- Clean swivel on cleaner head by running it under a tap
The Hayward Poolvergnuegen The PoolCleaner 4 Wheel does not clean the entire pool
Solution:
- The hose is to short
- The float(s) may be in the wrong position
- The Hose Cone Swivel (on the turbine cover) may be dirty Clean it.
- The return fittings may be pushing the PoolCleaner hoses away. Point them down.
- Low wheel RPM (insufficient flow)
The Hayward Poolvergnuegen The PoolCleaner 4 Wheel climbs the wall too much or climbs out.
Solution:
- The tire treads and skirts may be worn down
- Too much suction or flow
- You are not using the Adjustrable Regular Valve
The Hayward Poolvergnuegen The PoolCleaner 4 Wheel won’t climb the wall
Solution:
- The float(s) may be in the wrong position
- The hose is too short
- The return fitting may be pushing the Poolcleaner hoses away. Point them down.