Dolphin Liberty 200 Troubleshooting

User Reported Dolphin Liberty 200 Problems

  • Charging indicator issues
  • Faulty charging cycle
  • Inconsistent performance
  • Battery connection problems
  • Frequent disconnections
  • Short charging duration
  • Fault status occurrence
  • Red to green transition
  • Reliability concerns
  • Maintenance difficulties
➤ I have problems with my Dolphin Liberty 200

Most Common Dolphin Liberty 200 Reported Problems

Power and Charging
1 issues

Technical Malfunction Issues

Power and Charging Issues

Performance Issues

Setup and Usage Issues

Customer Support Issues

Other Issues

Troubleshooting Your Dolphin Liberty 200: Manufacturer's Recommendations

Power and Battery Issues

Dolphin Liberty 200 – The Dolphin Liberty 200 doesn’t charge

Possible Causes Solutions
  • Robot’s Battery LEDs are blinking in a special pattern (central LED – then right and left LEDs). The issue occurred while the robot was connected to the charger.
  • In case the robot feels hot to the touch: charge the robot in a shaded location or when the temperature is low, for example: overnight / indoors.
  • In case the robot feels cold to the touch: try charging the robot in a warmer location.
  • The Power Unit doesn’t show any LEDs at all.
  • Try connecting the charger to a different power outlet. Make sure that the charger LED is on.
  • The Power Button LED is red.
  • Try disconnecting the charger from the Power Unit and connecting it back a few times.
  • Check whether an object is blocking the connection between the charger and the Power Unit.
  • The charging process stops, and the Power Button LED is blinking red for a short period of time.
  • Make sure that the charger is connected properly.
  • Check whether an object is blocking the connection between the charger and the Power Unit.
  • Charging progress is stuck: one of the battery LEDs is blinking and doesn’t switch to the steady light after a long period of time.
  • Check that the charger LED turns on.
  • Make sure that the charger is connected properly.
  • Check whether an object is blocking the connection between the charger and the Power Unit.
  • Charge overnight in a cooler location.

Dolphin Liberty – The Dolphin Liberty battery is not full after charging

Possible Causes Solutions
  • The robot’s battery discharges while the robot is turned off.
  • Fully charge the robot (until all battery LEDs are steady green), make sure that the robot is turned off. Do not start the cleaning process. Check the battery status after 2 days. If the battery charge level is significantly lower – contact Customer Care.

Operational Issues

Dolphin Liberty – The Dolphin Liberty Red LED light appears above the power button

Possible Causes Solutions
  • Make sure there’s nothing stuck in the tracks or brushes. Clean the filter and make sure it’s not clogged. Disconnect and reconnect the charger 3 times.

Dolphin Liberty – The Dolphin Liberty will not start the cleaning cycle. The Power Button LED is red.

Possible Causes Solutions
  • The charging process works properly. The robot finishes a 90-minute cleaning cycle. During the Eco mode and Cycle Selector, the robot will climb the walls even if configured otherwise. The robot will not respond to Click-UpTM properly – will start the cleaning cycle instead of waiting at the wateline.
  • Contact Customer Care: wecare@maytronics.com
  • The charger is connected to the robot.
  • Disconnect the charger and press on the robot’s power button to operate.
  • The charger is disconnected from the robot. The charging process works properly.
  • Contact Customer Care: wecare@maytronics.com

Dolphin Liberty 200 Pool Cleaner Not Working?

If you're experiencing issues with your Dolphin Liberty 200 pool equipment, you're not alone. Many users have faced similar challenges and have shared their experiences to help others troubleshoot and resolve these problems.

  1. My Dolphin when plugged in to charge it goes to charged [red] then to fully charged [green] after ten minutes other times it goes to fault [yellow]
    I have disconnected the battery and reconnected it many times and it works sometimes.

    Issue Category:
    Power and Charging

    Ownership Length:
    N/A

    Reply Submit Your Own Issue

Submit an Product Issue for Dolphin Liberty 200

The maximum upload file size: 10 MB. You can upload: image. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop file here